• Aluminum parts are manufactured painted in the desired RAL color or with a natural anodized finish.

• The curved glass panels and side panels used in manual revolving doors are made of 8 mm tempered glass.

• The arms used in manual revolving doors are horizontal aluminum tubes mounted to the glass. The ceiling is covered with aluminum sheet. All aluminum surfaces will be the same color as the body.

• The ceiling and fascia plate used in manual revolving doors are 2 mm thick.

• The bent profiles and wing profiles used in the manual revolving door have a medium thickness of 5 mm and a minimum thickness of 3 mm.

• The brushes used in the manual revolving door are horsehair brushes and are 4 cm long.

• The wind and dust-catching horsehair brushes can be replaced if desired.

• The system uses mechanical floor locking.

• LED spotlights are available (OPTIONAL). All revolving doors and equipment (except glass) are covered by a 2-year service and installation warranty and a 5-year spare parts supply warranty, provided that the necessary periodic maintenance is performed.

Manual Revolving Doors have always been a preferred architectural model due to their unique design, wide range of material options, and diameter and height dimensions that can be adjusted according to project requirements.

Manual Revolving Doors are an economical solution, providing energy savings and prestige at building entrances. They do not require electricity or an air curtain. One of the most important features of Manual Revolving Doors is that they can be converted to Automatic Revolving Doors at any time. The system is manufactured and installed with its own unique profile system, featuring 3-4 wings, an elegant design, minimal canopy height, and natural anodized or painted in the desired RAL color.

Horsehair brushes mounted around the revolving door wings prevent unwanted dust, flies, etc. from entering during door operation without scratching the glass and aluminum. No bearings are used in the lower bearing system of manual revolving doors. Special self-lubricating Vulkolen material is used. It protects the doors from conditions that may cause malfunctions, such as dust and water. All doors are designed for high traffic loads and operating frequencies. For this reason, they can be used comfortably in places with heavy traffic loads, such as business centers.